 |
Standard base board B-1 (formerly KM-1)
Base system on which a maximum of 8 functional modules can be mounted.
In addition to signal wiring connected between functional modules, dedicated clock wiring,
JTAG wiring, reset control, etc., is wired. |
For further details click here |
 |
Base board B-20 containing FPGA (Virtex-4 version) Due to be launched 3Q/06
New platform containing Virtex-4 FPGA with operation at 200MHz guaranteed.
Accverinos® series functional modules can be mounted.
Provided with USB 2.0, PC2700 DDR memory (maximum 1GB can be mounted),
PCI, and other interfaces. Also, by connecting multiple units it can
be used as an even larger scale verification platform. |
For further details click here |
 |
FPGA module M-1
FPGA module containing Xilinx XC2V6000-FF1152. The
I/O pins are connected to the base system via 4 connectors. Part of
the I/O pins are connected to the IDE connector of the FPGA module,
and can directly exchange with the other modules via ATA133 cable.
|
For further details click here |
 |
SDRAM module M-2
Memory module on which 133MHz memory clock SDRAM can be mounted.
A maximum of 512MB (256MB×2)
SO-DIMM type SDRAM can be mounted.
Also, a large scale FPGA (Xilinx XC2V6000-FF1152) is mounted. |
For further details click here |
 |
Universal module M-3
A module on which electronic components, connectors, etc., can be mounted.
By using this module, it is possible to wire to existing boards and devices.
Also, it is possible to input, output, and monitor all types of signals.
|
For further details click here |
 |
DDR memory module M-10
(Stratix® II version) Newly launched
Memory module on which 400MHz memory clock DDR SDRAM can be mounted.
A maximum of 1GB (512MB x 2) of
SO-DIMM type DDR SDRAM memory can be mounted.
Also, large scale FPGA (Altera® Stratix®
II (EP2S130F1508)) is mounted in the standard configuration.
|
 |
| For further details click here |
 |
DDR memory module M-20 (Virtex-4 version) Newly launched
Function module with 2 SO-DIMM sockets on which 333MHz (PC2700) memory
clock DDR SDRAM memory can be mounted. Supported up to a maximum of
512 MBytes. Xilinx Virtex-4 (select from XC4VLX100/160/200-FF1513)
adopted as the FPGA.
|
For further details click here |
 |
SO-DIMM
extension module M-40/41 (IDE version) Newly
launched
Connector module to allow connection to external equipment.
By attaching to the 200 pin SO-DIMM socket of M-10/M-20 functional
module, this connector module establishes signal connections between
a functional module and external equipments or other functional modules.
|
For further details click here |
 |
Chassis
Dedicated chassis to support the base system B-1.
There are 2 types that can be selected when placing orders: acrylic and metal. |
For further details click here |
 |
PCI bridge
Used when controlling B-1 with a personal computer.
Control of the IP Core samples of Accverinos ®
series are performed using this PCI bridge. |
For further details click here |
 |
Circuit partitioning and
synthesis tool
Synplicity Corporation Ceritify® bundled version.
Can be provided bundled with Accverinos® products with a 3 month, 6 month, or 1 year time license. |
For further details please inquire here |
 |
VS-Board
Accverinos® VS-Board is the ideal prototype evaluation board for
testing and prototype development with ALTERA Stratix devices and
XILINX Virtex-II devices. |
For further details click here |
|
